Dallas

REITNOUER ALUMINUM FLATBED TRAILERS

maxlite aluminum trailer

MaxLite®

The MaxLite is Reitnouer’s lightest aluminum flatbed, designed for weight-watching customers who want high strength but who don’t haul heavy, concentrated loads.

maxmiser all aluminum trailer

MaxMiser®

The unique bolted design of the MaxMiser with such innovative features as a solid one-piece cross member reinforced with an inner extrusion adds reinforcement between the main beams.

big bubba aluminum trailer

Big Bubba®

Big Bubba models boast a GVWR of 100,000 lbs. and are rated at 70,000 lbs. in 10 feet and 60,000 lbs. in 4 feet — a legend that continues to set the standard for heavyweights.

maxliote aluminum trailer features

MaxLite is Reitnouer’s lightest aluminum flatbed with a GVWR rating of 80,000 lbs., a 50,000 lb. rating in a 10-foot section, and a 45,000 lb. rating in a 4-foot section — a good choice for evenly distributed loads.

MaxLite Features:

  • A real workhorse for average loads, particularly over long distances
  • Also available in fixed spread, slider and lift axle versions
  • Available with Reitnouer’s full range of features and options
  • 4 -1/2″ arch
  • Backed by the best warranty in the trailer industry

Reitnouer MaxMiser flatbeds have a 90,000 lb. GVWR capacity, rated at 60,000 lbs. in a 10-foot section, and a full 50,000 lbs. in a 4-foot section. The unique bolted design of the MaxMiser, combined with such innovative features as a solid one-piece cross members reinforced with an inner extrusion that adds reinforcement between the main beams, and our tie-down system with four standard (and a fifth optional) tracks to make sure you can secure your cargo at any location, offers a unique combination of value, capacity, weight savings and longevity to your rig.

MaxMiser Features:

  • The workhorse of the flatbed trailer industry
  • Available in fixed spread, slider, lift axle, and drop deck versions
  • Available with Reitnouer’s full range of features and options
  • Solid single-piece crossmember reinforced with an inner extrusion that adds strength between the main beams
  • Backed by the best warranty in the trailer industry
peak trailer brands maximizer aluminum trailer features
Big Bubba aluminum trailer features

Big Bubba flatbed models boast a GVWR of 100,000 lbs. and are rated at 70,000 lbs. in 10 feet and 60,000 lbs. in 4 feet — a legend that continues to set the standard for heavyweights. Not bad for a trailer that weighs an average of 3,000 lbs. less than any steel trailer even approaching Big Bubba’s hauling capacity.

Big Bubba Features:

  • One of the highest concentrated load ratings in an aluminum flatbed
  • Available in fixed spread, slider, lift, multi-axle and drop deck versions
  • Available with Reitnouer’s full range of features and options
  • Two times the trailer lifespan over steel/ aluminum combination trailers
  • Extended lifespan; improved load and/or fuel efficiency
  • Backed by the best warranty in the trailer industry

Reitnouer Trailers are packed with in-demand innovations

air & electric connectivity

7-Way Auxiliary Plug for the Front of Trailer (Standard)

(7-Way Socket) P/N: 500713     

7-Way Plug Options for the Front of the Trailer (Optional)

Qty 2 (7-Way Socket) P/N: 500713         
(7-Way Socket ISO) P/N: 500714
(4-Way Receptacle) P/N: 500606
(Emergency Gladhand) P/N: 450041
(Service Gladhand) P/N: 450042

Front Sill 7-Way – 4-Way (Optional)

(7-Way Socket) P/N: 500713         
(4-Way Receptacle) P/N: 500606

Front Sill 7-Way – 4-Way w/Shut-Off Glad Hands for Double Air & Electric (Optional)

(7-Way Socket) P/N: 500713
(4-Way Receptacle) P/N: 500606
(Emergency with Shut-off) P/N: 450110
(Service with Shut-off) P/N: 45011

Front Sill 7-Way, ISO (Optional)

(7-Way Socket) P/N: 500713
(7-Way Socket ISO) P/N: 500714

Lower Double Air & Electric Gladhands (Optional)

Qty 2 (7-Way Socket) P/N: 500713
(Emergency with Shut-off) P/N: 450110
(Service with Shut-off) P/N: 45011

 

Rear 4-Way Receptacle (Optional)

P/N: 450044

air options

Air Tank – Aluminum 9.5″ Dia. (Optional)

P/N: 450058-A

Air Tank – Large Aluminum 12.5″ Dia. (Optional)

P/N: 450058L-A

AXLES

Axle – Hendrickson HXL5 Axle

Available with 5-year Wheel End Warranty.
Part number varies.

Axle – Hendrickson HXL7 Axle

Available with 7-year Wheel End Warranty.
Part number varies.

Axle – Lift Axle

(Flatbed) P/Ns: AANL 230L; AAL 250L, 300L; 13K Steerable
(Drop Deck) P/Ns: AANL 230L; AAL 250L, 300L; 17.5″, 19.5” & 22.5” Axle

Axle – Multi-Axles

(Shown 4-Axle wide)
Choice varies to suit customer needs.
P/Ns: AANT 23K; AAT 25K, 30K; AANL 230L; AAL 250L, 300L; 13K Steerable

Axle – Slider Multi Location

(Shown Rear/Open Dual Slider location)
Part number varies based on trailer configuration.

Axle – Sliding Axle Control Box

(Flatbed) Valve – Single Ball w/Slider Box
P/N: 450211
(Drop Deck) Valve – Dual Ball w/ Sider Box
P/N: 450212

Brakes – Disk Brakes (Hendrickson)

(Flatbed) P/Ns: AANT 23K; AAT 25K, 30K; AANL 230L; AAL 250L, 300L
(Drop Deck) P/Ns: 17.5” HT 250 19.5” and 22.5”; AANL 230L; AAL 250L & 300L

Brakes – Drum Brakes (Hendrickson)

(Flatbed) P/Ns: AANT 23K; AAT 25K, 30K; AANL 230L; AAL 250L, 300L
(Drop Deck) P/Ns: 17.5” HT 250; 19.5” and 22.5”; AANL 230L; AAL 250L & 300L

Brakes – Dust Cover – LDA/Intraax

P/N: 101840

Inflation – Hendrickson Tire Max Pro

Part number varies based on trailer configuration.

Tires/Wheels – Stemco Hubodometer

Part number determined by tire size.
P/N: 650-xxxx

Tires/Wheels – Super Single Tire and Wheel

The part number varies based on trailer configuration.

BADING/ PLACARDS

Certification Holder – Round (Optional)

P/N: 97960

Custom Badging/Placards

The Reitnouer logo or yours, ask about the options available.

Custom Badging/Placards

The Reitnouer logo or yours, ask about the options available. 

Hazardous Materials Placards Hanging (Optional)

(Bracket) P/N: 201509

Hazardous Materials Placards Mounted (Optional)

(Holder) P/N: H-415 

coil racks & accessories

Full Coil Package (Optional)

(Shown Underside View)
12 pcs. – P/N: 200181 x 12

Mini-Coil Package (Standard)

(Shown Underside View)
6 pcs. – P/N: 200181 x 6

Shotgun Coil Rack (Optional)

(60″) P/N: 201661
(84″) P/N: 201686

Small Coil Rack (Optional)

(Shown with 4 x 4 blocks – not included)
(6.5″) P/N: 200695

Suicide Coil Rack (Optional)

Requires 4-wood Nailer floor option and center and outer lock blocks.
Suicide Rack (96″ wide trailer) P/N: 201691
Suicide Rack (102″ wide trailer) P/N: 201696

Suicide Style Coil Rack Lock Block (Center)

P/N: 203001

Suicide Style Coil Rack Lock Block (Side Rail)

(96″ Width) P/N: 203001-6
(102″ Width) P/N: 203001-2

container locks

Flush Mount Side Rail Container Locks (Optional)

P/N: 101321

Raised Twist Lock Container Locks – Rear Sill (Optional)

R/H P/N: R-101300
L/H P/N: R-101300
Bases
R/H P/N: R-101302
L/H P/N: R-10130

decks

3-Wood Nailer (Standard)

Part numbers vary with Nailer length and width.

4-Wood Nailer w/Center Tiedown Track (Optional)

Also available with no Tiedown Track.
Part numbers vary with trailer length and width.

All-Wood Floor (Optional)

Part numbers vary with trailer length and width.

Dock Plate (Optional)

102″ Wide Trailer (18″) P/N: 100612
102″ Wide Trailer (22″) P/N: 100613
96″ Wide Trailer (18″) P/N: 100611

DOT Wrap Around Bulkhead (Optional)

102″ Wide Trailer (48″x10″) P/N: 224020-S
102″ Wide Trailer (48″x16″) P/N: 224620-S
102″ Wide Trailer (48″ Flat) P/N: 224F20-DOT
96″ Wide Trailer (48″x10″) P/N: 224060-S
96″ Wide Trailer (48″x16″) P/N: 224640-S

dunnage racks

Dunnage Rack – End Cap w/Bottom Tray (Standard)

(Dunnage Rack Bottom Tray – Open – 105″L x 24″D)
P/N: 201557-105
(Dunnage Rack Bottom Tray – Open – 96″L x 24″D)
P/N: 20155

Dunnage Rack – End Cap w/o Bottom Tray (Optional)

Dunnage Rack Side Left End Cap
P/N: 201523-L
Dunnage Rack Side Right End Cap
P/N: 201523-R

Dunnage Rack – Endcap w/Stainless Steel Door (Optional)

P/N: 201524-REIT-DOOR-SS

Dunnage Rack – Long (8 ft.) (Optional)

P/N: 201524

Dunnage Rack – Long (8 ft.), Full Mesh (Optional)

P/N: 201524-MK

Dunnage Rack – Open Cross, for Drop Deck (Optional)

P/N: 201524-K

Dunnage Rack – Neck (19.5 in.) for Drop Deck (Optional)

P/N: 201552-KEANE

Rear Dunnage Box in Backend Center Panel (Optional)

(Shown Closed)
P/N: 200482

Rear Dunnage Box in Backend Center Panel (Optional)

(Shown Open)
P/N: 200482

landing gear

Landing Gear (Standard)

(Flatbed)
P/N: 100540 LG SET HOLLAND
P/N: 100550 LG SET FB JOST
P/N: 100550-AL LG SET ALUMINUM FB JOST (shown)

(Drop Deck)
P/N: 100551 Landing Gear JOST DD NO TAB
P/N: 100541 Landing Gear HOLLAND V DD NO TAB
P/N: 100551-AL Landing Gear JOST ALUM DD

Mid Landing Gear (Optional)

Part numbers vary based on trailer configuration.

Rear Landing Gear (Optional)

Part numbers vary based on trailer configuration.

lighting

Lighting – Complete (Clear) (Optional)

(Marker Light Amber) P/N: 4177CA-AMP
(Sequential Turn Amber) P/N: 4179CA-AMP
(Marker Light Red) P/N: 4177CR-AMP
(Stop/Tail/Turn) P/N: 4178CR-AMP
(Corner Marker Light Red) P/N: 4881CR-AMP

Lighting – Complete (Standard)

(Marker Light Amber) P/N: 4177-AMP
(Sequential Turn Amber) P/N: 4179-AMP
(Marker Light Red) P/N: 4177-AMP
(Stop/Tail/Turn) P/N: 4178-AMP
(Corner Marker Light Red) P/N: 4881-AMP

Lighting – Flange Covers (Standard)

(2.5″ Flange Cover) P/N: 10715
(4″ Flange Cover) P/N: 44705

Lighting Panel – 2-LT Lower/Back Up (Optional)

(Shown with 5-Light CTR)
P/N: 105954
P/N: 105992

Lighting Panel – 3/5/3/5 BTM (Optional)

(Shown 102″)
LED Clr Mrkr Red (8) P/N: 4177CR-AMP
2.5″ Flange Cover (8) P/N: 10715
2.5″ Reflector w/Grom Clear (2) P/N; 2.5 REF CLR
LED Clear STT (6) P/N: 4178CR-AMP
4″ Flange Cover (6) P/N: 44705
LED Surface Mount R. Corner (2) P/N: 4881CR-AMP

Signals – Sequential Turn Signal (Standard)

P/N: 4179-AMP

Signals– Side Arrow Turn Signal – (Optional)

P/N: 4505L-AMP LED Arrow LH
P/N: 4506R-AMP LED Arrow RH

Specialty – Backup Lamp (Optional)

(LED 4″ Backup) P/N: 4504-AMP

Specialty – Dropdown Lights (Optional)

(2.5″ Round Short) P/N: 500212S
(2.5″ Round Extended) P/N: 500212E
(Mid Turn Short) P/N: 500200S
(Mid Turn Extended) P/N: 500200E

Specialty – Lamp: 3/4″ LED Light (Optional)

P/N: 177R LED Red
P/N: 177A LED Amber
P/N: 177CR LED Clear Red
P/N: 177CA LED Clear Amber
P/N: 176A ¾” Light Adapter Flange
P/N: 176B Bezel ¾” Light

Specialty – Lamp: LED 2.5″ Amber Marker Light (Standard)

Shown on side rail. Also Standard on front corner.
P/N: 4177A-AMP

Strobe Light RH/LH; Amber Only (Optional)

(Strobe only)
P/N: 818SA-1 Lamp LED Strobe RH
P/N: 818SA-2 Lamp LED Strobe LH

Strobe Light w/Turn Signal RH/LH (Optional)

P/N: 8660AF-1 Turn/Strobe, RH
P/N: 8660AF-2 Turn/Strobe, LH

Telescopic Wide Load/Oversize Load Lights (Optional)

P/N: 420040 Wideload Lights Set LED Red/Amber
P/N: 420040-C Wideload Lights Set CAN. Amber/Amber

load security

Security – Coil Post Pocket (Optional)

Part numbers vary according to customer needs.

Security – Load Leveler (Hook Style) (Optional)

Several sizes available.
Part number determined by drop and tire size.
P/N: R-LL022XXXHL & R-LL022XXXHR

Tie Down – Chain Tie-Down (In-Floor) (Optional)

P/N: 49583-10

Tie Down – D-Ring – Bolt-On (Optional)

P/N: 49215-SM

Tie Down – D-Ring – In-Floor (Optional)

P/N: 49220

Tie Down – D-Ring – Sliding (Optional)

P/N: 49210

Tie Down – Drop Hook – Sliding (Optional)

P/N: 49768

Tie Down – J-Hook: Oval (Optional

(6″) P/N: 200119
(9″) P/N: 200119-9

Tie Down – J-Hook: Triangle (Optional)

(Shown w/Standard Siderail) For use with chains
(6″) P/N: 200119T
(9″) P/N: 200119-9T

Tie Down – Rope Hooks (Bolt-On) (Standard)

P/N: 201526-C

Tie Down – Strap: 4in x30ft, Ancra Reit (Optional)

Imprinted with Reitnouer logo.
P/N: 49571-1367

Winch – LL Sliding Winch (Standard)

P/N: 49207

Winch – Side Winch Recessed (Optional)

P/N: 200631

Winch – Three-Bar Side Winch: 45-Degree (Bolt-On) (Optional)

P/N: 48101

Winch – Three-Bar Winch (Optional)

P/N: 49207-3B 

Winch – Winch Strap Retainer (Optional)

P/N: 200686

mudflap brackets

Flap 15.5″ Front of Rear Axle 102 L/R

Flap in front of rear axle.
P/N: R-120726L/R

Flap 18″ Front of Front Axle 102 L/R

Flap in front of front axle.
P/N: R-120728L/R

Mudflap Bracket – Pass-Thru Mud Flap Bracket

(Left) P/N: R-120727L-P
(Right) P/N: R-120727R-P

Mudflap Bracket – Special Assemblies

Available in rear of multiple axle configurations.
Part number varies based on trailer configuration.

Specialty – Front Axle Cover

Our logo or yours or none. Available as an option on new trailers only. Not available aftermarket.

Necks & Kingpins

Kingpin – Combinations (Standard)

Various Kingpin combinations available.
Reitnouer offers a variety of kingpin sizes in 14, 18, 24, 30 and 36 inch

Kingpin – Dual Drop In (Optional)

(Shown Topside View)
Options Vary – Contact Dealer
P/N: KP SPC’L DD

Kingpin – Dual Drop In (Optional)

(Shown Underside View)
Options Vary – Contact Dealer
P/N: KP SPC’L DD

Kingpin – New Air Ride (Optional)

P/N: CRK20 DV

Neck – 7-Inch Low Profile Neck (Optional)

Part number varies with Kingpin setting.

Teflon Pad 5th Wheel XX w/HDWR (Optional)

Part number determined by Kingpin setting.
P/N:1002XX

rear ends

Rear End – Base – for 53-ft. Drop Deck (Standard)

(Shown w/Optional Strobe Lights)
Part number varies with trailer configuration.

Rear End – Base (Standard)

(Shown w/Optional Clear Lights & 3/5/3/5 BTM; Shown 102″)
P/N: R-202923

Rear End – Fleet “3-3-3” (Standard)

(Shown w/Optional Strobes)
Part number varies with trailer configuration.

Rear End – Fleet (Optional)

(Shown w/Optional D-Rings)
Part number varies according to the fleet customer.

Rear End Option – Dock Bumper Extension (Optional)

P/N: DOCKBUMPEXT – ALL

Specialty – B-Train Aluminum Rear End (Standard)

Available through new trailer configuration.
P/N: 202922STNG Stinger Aluminum Bumper

Specialty – B-Train Stinger Steps (Optional)

Part number varies with trailer configuration.

Specialty – Beaver Tail – 4-Ramp Set (Optional)

(Shown in Down Position)
(4-Ramp Set) P/N: 206054
(2-Ramp Set) P/N: 206052

Specialty – Beaver Tail – 4-Ramp Set (Optional)

(Shown in Up Position)
(4-Ramp Set) P/N: 206054
(2-Ramp Set) P/N: 206052

Specialty – Fixed Rear Steps (Optional)

(Shown on a 48-ft. Trailer)
Other trailer lengths available. Fleet version available.
(Standard) P/N: 201538
(Fleet) P/N: 201534F

Specialty – Forklift Style Rear End (Optional)

Option available through new trailer configuration.
P/N: FLU-M55.3PB50H-45

Scales

Scale Rite Weigh Digital in Box w/Bluetooth Connection (Optional)

P/N: 201-EDG-01BG

Scale-A-Matic (Optional)

Scale-A-Matic (Optional)

side rails

Rub Rail Front Sill (Optional)

P/N: 200091

Rub Rail Rear Sill (Optional)

(102-inch wide) P/N: 200099-102
(96-inch wide) P/N: 200099-096

Side Rail – Base (Standard)

Part number varies with trailer length.

Side Rail – DOT Tape (Standard)

P/N: 464-REIT

Side Rail – Front Corner 45-Degree (Standard)

P/N: R-200372

Side Rail – Oregon Anti Spray (Optional)

Shown w/Optional Bolt-On Winches and Bolt-On-Hooks
P/N: 201651-8

Side Rail – Raised Wheel Well (Optional)

Part numbers vary for Splash Guard Wheel Well.

Side Rail West Coast (Optional)

Part number varies with trailer length.

Specialty – Flag Holder – Bolt-On (Optional)

P/N: 203219

Specialty – Flag Holder – Weld On (Standard)

P/N: 203210

Storage

J-Hook Tie Down Holders (Optional)

P/N: 200614

Snow Chain Hangers (Optional)

(Sold Individually)
(Standard) P/Ns: 2015390L and 2015390R
(Short) P/Ns: 20153980L and 20153980R

Spare Tire Carrier (Optional)

P/N: 600030

Tarp Systems

Trailer Tarp System (Optional)

Options Vary – Contact Dealer

tool boxes

Aero Toolbox – T-Handle (Optional)

Flatbed (24″x24″x60″ – Aluminum) P/N: TAS-2312U
Flatbed (24″x24″x60″ – Stainless Steel) P/N: TAS-2312U-SS
Drop Deck (18″x24″x60″ – Aluminum) P/N: TAS-2395U
Drop Deck (18″x24″x60″ – Stainless Steel) P/N: TAS-2395U-SS

Cam-Lock Toolbox (Optional)

Flatbed (24″x24″x60″– Aluminum) P/N: TAS-2312U-LOCK
Flatbed (24″x24″x60″– Stainless Steel) P/N: TAS-2312U-SS-LOCK
Drop Deck (Aluminum) P/N: TAS-2395U-LOCK
Drop Deck (Stainless Steel) P/N: TAS-2395U-SS-LOCK

Reitnouer Toolbox 60″X24″X24″ (Optional)

(Shown Closed)
(Door Drivers Side) P/N: TBX602424-LH
(Door Passenger Side) P/N: TBX602424-RH

Reitnouer Toolbox 60″X24″X24″ (Optional)

(Shown Open)
(Door Drivers Side) P/N: TBX602424-LH
(Door Passenger Side) P/N: TBX602424-RH

Scroll to Top